3M SCP712 DLP Projector Short-Throw Including Accessories

  • $ 3,843.00 MXN
    Precio unitario por 
  • Ahorra $ 692 MXN



Modelo: 3M - METEK-99480337

3m Scp712 Dlp Projector Short-throw, Including Accessories


ЗМ SCP712 Short-Throw DLP Projector

Digital Multimedia Projector
Brightness: 2000 lumens
Contrast: 2100:1
Native Resolution: 1024x768
HD Video Mode: 720p
Display Type: DLP
Projector Weight: 9.9 lbs.

"Projector has been Professionally Tested and is in Good Working Condition."


  • Lamp and filter:

Lamp and filter are cleaned to improve image quality and extend projector life.

  • Lamp hours:

Genuine Lamp has been used for few hours. Over 50% lamp life remaining.

  • Image Quality:

Very Good.
  • Cosmetic Condition:

Good, some scratches, little dust.

HDMI For Every Projector

If the projector is not equipped, HDMI video input is available via included HDMI to VGA adapter.


FREE & Convenient Accessories Included by :

  • Power Cable *1

  • HDMI Video Adapter *2

  • VGA or HDMI Cable *3

  • Remote Control *4

No other cables or accessories are included.


*1 Included in domestic shipments and Canada only. A power cable is NOT included in international orders. The operation of any electronics using foreign adapters may cause the equipment to malfunction and/or become a fire hazard.

*2 HDMI Video Adapter is compatible with most HDMI sources, but is not 100% guaranteed. Audio may not be supported. If equipment already has an HDMI port, you will not need or receive an HDMI adapter.

*3  will include either a VGA or HDMI Cable depending on the model requirements of your projector.

*4 Included is a high quality remote custom programmed to specifically work with your model of projector.

Photo Disclaimer: All photos shown are for illustrative purposes only, intended to accurately showcase the model and condition of what you will receive. Equipment may have some cosmetic marks, scratches and/or blemishes in areas other than what is shown.


  • We provide a 30 Day Warranty on all of our product offerings unless indicated otherwise.
  • If you have any questions or concerns, please contact us first and we will make EVERY effort to make everything just right for you!

Important Shipping Information

  • Standard and economy shipping is available only for the lower 48 US states.
  • You must purchase Expedited/Priority Shipping services if your shipment is going to other US territories and PO boxes.


OK, In a Nutshell, Why Should I Buy from ?

You can find projectors in many places, but it is truly difficult to know who you can trust to buy from when it comes to used projectors. For over 10 years running, we specialize in refurbishing electronics.

We acknowledge it is mission critical to maintain the highest standards by offering ALL of the following to our customers:

  • Square and honest pricing;
  • FREE accessories (all of the necessary items to properly operate your projector right out of the box);
  • Reasonable shipping time and free shipping on most items;
  • Quality testing and refurbishing all projectors correctly using industry experienced technicians.
  • thoroughly tests, cleans and replaces any damaged or worn parts, guaranteeing a properly functioning projector with a beautiful picture every single time!


Things to Look for
When You are Buying a Used Projector

(You don't have to read any information below.)

The following information should be viewed as constructive advice based on years of experience.

Buying a used projector will save you lots of money, but there can be unforeseen problems if you don't purchase from a company that specializes in projectors and fully guarantees complete functionality of their merchandise. 

Projector Image Quality, Image Brightness, Thoroughness of Inspections, Proper Representation

There are many factors that may affect image quality, brightness and overall value of a projector, most of which goes unnoticed by the untrained eye.

1. Dust & Optic Burns - Image Quality

Optic burns may discolor the image or create discolored spots. These spots can be created from long hours of use, inappropriate temperature, or dust.

Most used projectors are dusty. Dust overall creates darker image projection and can leave spots on the projection by getting attached to the optic inside. It may be nearly impossible to remove the dust from the optic without completely disassembling the projector. Dust may also be loosened during the shipping process and could later burn into hot optic surfaces of the projector creating spots on the image. Also, dust can attach itself to heat sensitive areas thus overheating the projector and causing a malfunction.

technicians check the projection image quality and thoroughly clean the inside and outside of projectors to eliminate as much dust as possible.

2. Lamps - Image Brightness

    Important Education about Projector Lamps:

    Many non-authentic non- lamps can die within 6 to 12 months whether the projector is being used or not, generic lamps may produce a darker or brighter image than an lamp. Non-authentic lamps die quickly because of inferior build quality whereby the gas sealed within the lamp leaks. Also, the brighter lamp may burn the projector`s optic because it could run on a higher temperature than the projector can withstand. Sometimes, older uncared for lamps with high-end hours are left in the projector, resulting in a shorter life for your lamp.

    ALWAYS insures you will receive a lamp with low hours. In addition, inspects every lamp to check for burns, dust and clarity of the lamp reflector. 

    3. Inspections and Testing

    Projector Inspections and Testing.
    Used projectors MUST be thoroughly inspected and tested for optimal functionality and endurance. For example, some used projectors can overheat and simply just turn off to prevent over-heating over time. Also, it is hard to notice smaller malfunctions until it is too late like malfunctioning legs/buttons/ lamp hours, etc.

    Example: If a leg does not function properly, it could create a major hassle if you need to constantly set up, jimmy and move your projector around.

     inspects EVERY aspect of the projectors we sell. Why do we go thru so much hassle? 
    We Take Pride in Our Work and in Our Ability to Offer the Very Best High Tech Reconditioned Products Available! 

    4. Honorable Representation

    Education with Regard to Projector Specifications:
    It is important to familiarize yourself with projector specifications. You can identify for yourself whether a particular projector best suits your type of needs.

    A Seller should represent the product to the best of their ability and avoid using quality words like "super bright", "outdoor projector", "MSRP $9999", or something similar that draws the buyer away from the true and actual projector specifications, value and capabilities.

    With , you always get exactly what you pay for and then some!


    How to Properly Choose the Right Type of Projector
    to Best Suit Your Specific Needs

    OCCASIONAL USAGE [Really Tight Budget, Bright Picture Required]

    Examples: Family reunions, Parties, Ceremonies. Most appropriate if you want to make a good impression on a smaller budget.


    * DLP projector for $150-$200
    * 2500+ ANSI lumens

    WEEKLY USAGE [School/college, Church]

    Examples: For teachers, consider a "Short Throw LCD Projector". This way the teacher will not be blinded by the light if he/she looks at the projector. (Search "short throw projector" for more information).


    * LCD projector 2000+ (recommended in a darker room) or 2500+ ANSI lumens

    Important Note: DLP projectors are not recommended in this case scenario. They are less reliable and they create a rainbow effect for images that are in motion. (Search: "DLP projector rainbow effect" for more information).

    COMMERCIAL USAGE (Powerpoints, Short Video Presentations)


    * LCD for presentations which are more subtle like PowerPoint presentations. Richer color, more reliable in transportation, but bigger
    * Optional: Use DLP for video presentation or if the weight is a consideration; 3-4lb vs 6-7lb

    WEEKLY USAGE (Home Theater, Games)


    * High contrast LCD (preferably) 2000:1 or more
    * 3D DLP 3000+ lumens for 3D movies
    * Native Wide Resolution or at least 1024x768
    * 2500+ lumens
    * HDMI input

    OCCASIONAL USAGE (Home Theater, Games)


    * DLP 2500+ lumens with HDMI adapter
    * 1080i supported



    * No DLP projectors recommended. The heat/cold and humidity might burn the optic in the unit (some models) even within a few hours

    ¿Por que comprar con nosotros?

  1. Envio rapido y economico! Aproximadamente 8 dias desde la fecha de compra.
  2. Mas de 3500 productos para profesionales a los mejores precios.
  3. Soporte tecnico local en tu propio idioma !!
  4. La garantia mas grande y flexible del mercado.


    Usted puede recojer su producto en Nuestras Oficinas SIN COSTO alguno, o bien puede seleccionar cualquiera de las siguientes opciones :

    Estafeta Zona Metropolitana 231 m.n. 53 m.n.
    Redpack 231 m.n. 63 m.n.
    Estafeta Interior de la Republica 294 m.n. 53 m.n.
    Redpack Interior de la Republica 294 m.n. 53 m.n.
    Extra Urgente (DHL-FEDEX-UPS Internacional *aprox 3-4 Dias Hab.) 840 m.n. 252 m.n.

    Nota al calce...

    El nombre Comercial 3M® asi como tambien sus Logotipos son marcas comerciales registradas que pertenecen a su respectivos propietarios 3M Corporation y sus filiales.

    ¿Es legal la utilizacion de una Marca ajena en los anuncios publicitarios en Canales Comerciales en Internet  u otro Medio Comercial?

    El uso publicitario de una marca ajena por un tercero, se admite siempre y cuando dicho uso no afecte al fin distintivo de la marca utilizada y, no se aprecie un riesgo de confusion y aprovechamiento de la reputacion generada. La Doctrina y Jurisprudencia comunitaria de la Organizacion Mundial de la Propiedad Intelectual OMPI han establecido una serie de requisitos para la legal utilizacion de una marca ajena en publicidad comparativa.
    Para hacer una publicidad comparativa eficaz, puede ser indispensable identificar los productos o servicios de un competidor haciendo referencia a una marca de la cual este ultimo es titular, en cuyo caso, y siempre que se haga respetando las condiciones establecidas en la OMPI , no supone una violacion de la marca, nombre comercial u otros signos distintivos de un tercero.
    En virtud de que la alusion a la marca ajena es necesaria para indicar el destino del producto o servicio a comercializar, proporcionando con ello informacion al consumidor sobre los productos o servicios que adquieren en el mercado.
    Si faltara alguna marca comercial, tuviera errores o estuviera equivocada, pongase en contacto con nosotros lo antes posible para corregirla.